Looking for Ulefone Power Armor 13 USB Drivers? In this article, you will find latest MediaTek or Qualcomm and ADB drivers for Ulefone Power Armor 13 along with installation instructions.
So let’s get started!
Generally, there are two types of USB drivers that you need to have installed on your Windows 7, Windows 8, Windows 10 or Windows 11 computer to have proper connectivity of Ulefone Power Armor 13. One is ADB Drivers and the other is either MediaTek or Qualcomm Drivers, depending upon the chipset used on your Ulefone device.
Once you properly install these requisite drivers, you will be able to use your Ulefone Power Armor 13 with your computer to backup its data, transfer data, flash ROM or any other purpose.
Download Ulefone Power Armor 13 MediaTek Drivers
MediaTek Driver for Ulefone Power Armor 13 works with SP Flash Tool, SP MDT Tool and MTK Flash Tool, and are must-have if you want to flash ROM on your Ulefone Power Armor 13.
File Size: 9.5 MB
Installation Instructions for MediaTek Drivers
To install MediaTek (MTK) drivers, follow the below-mentioned steps:
Step 1: Extract the downloaded .zip file.
Step 2: Open the extracted folder and launch “Install Driver.bat” file.
Step 3: Press any key to start the process.
Wait for the process to get completed, which you will get to know by the success message.
Please note that if your Ulefone device is powered by Qualcomm processor, then you would need to install Qualcomm drivers instead of MediaTek drivers.
Download Ulefone Power Armor 13 ADB Drivers
ADB Drivers are used to connect any Android device to computer for the data transfer. They are light-weight in size and can be easily installed.
File Name: usb_driver_r13-windows.zip
File Size: 8.2 MB
ADB stands for “Android debug bridge” and they are drivers developed and distributed by Google, so credits to them!
Installation Instructions for ADB Drivers
In order to install ADB Driver for Ulefone Power Armor 13, follow the below steps:
Step 1: Extract the downloaded file.
Step 2: Open Device Manager.
Step 3: Click on Action -> Add Legacy Hardware.
Step 4: A “Add Hardware” wizard will open. Click on “Next”.
Step 5: Select “Install the hardware that I manually select from a list (Advanced)” option and proceed next.
Step 6: Click on “Show All devices” following by clicking “Next”
Step 7: Now select the extract file (refer to step 1) and click on “Next”
Step 8: Click on “Install” button on “Windows Security” pop-up.
Step 9: Once drivers installation is finished, click on “Finish” to conclude the process
MTP Drivers – *Optional
If you want to transfer photos or other media from your Ulefone Power Armor 13 to your computer, then it is recommended to download and install latest version of MTP USB drivers as well.
Without presence of right USB drivers, it can be extremely difficult and frustrating to transfer data or backup or flash rom on your Ulefone device by using your computer.
So, after following above USB drivers for Ulefone Power Armor 13 and following the installation instructions, you will be able to connect it with your computer.