Looking for Micromax Bolt Selfie Q424 USB Drivers? In this article, you will find latest MediaTek or SPD or Qualcomm and ADB drivers for Micromax Bolt Selfie Q424 along with installation instructions.
So let’s get started!
Generally, there are two types of USB drivers that you need to have installed on your Windows 7, Windows 8, Windows 10 or Windows 11 computer to have proper connectivity of Micromax Bolt Selfie Q424. One is ADB Drivers and the other is either MediaTek or Qualcomm Drivers or SPD Drivers, depending upon the chipset used on your Micromax device.
Once you properly install these requisite drivers, you will be able to use your Micromax Bolt Selfie Q424 with your computer to backup its data, transfer data, flash ROM or any other purpose.
Download Micromax Bolt Selfie Q424 MediaTek Drivers
MediaTek Driver for Micromax Bolt Selfie Q424 are must-have if you want to flash ROM on your Micromax Bolt Selfie Q424.
File Size: 9.5 MB
Installation Instructions for MediaTek Drivers
To install MediaTek (MTK) drivers, follow the below-mentioned steps:
Step 1: Extract the downloaded .zip file.
Step 2: Open the extracted folder and launch “Install Driver.bat” file.
Step 3: Press any key to start the process.
Wait for the process to get completed, which you will get to know by the success message.
Please note that if your Micromax device is powered by Qualcomm processor or SPD/UNISOC (Spreadtrum) chipset, then you would need to install Qualcomm drivers or SPD drivers instead of MediaTek drivers.
Download Micromax Bolt Selfie Q424 ADB Drivers
ADB Drivers are used to connect any Android device to computer for the data transfer. They are light-weight in size and can be easily installed.
File Name: usb_driver_r13-windows.zip
File Size: 8.2 MB
ADB stands for “Android debug bridge” and they are drivers developed and distributed by Google, so credits to them!
Installation Instructions for ADB Drivers
In order to install ADB Driver for Micromax Bolt Selfie Q424, follow the below steps:
Step 1: Extract the downloaded file.
Step 2: Open Device Manager.
Step 3: Click on Action -> Add Legacy Hardware.
Step 4: A “Add Hardware” wizard will open. Click on “Next”.
Step 5: Select “Install the hardware that I manually select from a list (Advanced)” option and proceed next.
Step 6: Click on “Show All devices” following by clicking “Next”
Step 7: Now select the extract file (refer to step 1) and click on “Next”
Step 8: Click on “Install” button on “Windows Security” pop-up.
Step 9: Once drivers installation is finished, click on “Finish” to conclude the process
MTP Drivers – *Optional
If you want to transfer photos or other media from your Micromax Bolt Selfie Q424 to your computer, then it is recommended to download and install latest version of MTP USB drivers as well.
Without presence of right USB drivers, it can be extremely difficult and frustrating to transfer data or backup or flash rom on your Micromax device by using your computer.
So, after following above USB drivers for Micromax Bolt Selfie Q424 and following the installation instructions, you will be able to connect it with your computer.